This Barbecue Pot Roast recipe is a delicious twist on the traditional pot roast! Plus, the leftovers are perfect for barbecue roast beef sandwiches.
Disclosure: Farberware Cookware sponsored this post and all opinions are 100% my own.
I love making pot roast for my family and I typically make it in the slow cooker as I did for these French dip sandwichesrather than making it in the oven.
But recently I was visiting with one of my friends and she said that when she makes a pot roast for her family, it doesn’t taste like the pot roasts that her mom used to make. She found out that her mom used to make pot roast by searing the meat on the stove and then cooking the roast in the oven so I decided to try her method with a twist.
I wanted to give my traditional pot roast dinner a flavor that would be perfect for spring or even summer, so I made it a Barbecue Pot Roast and served it with roasted asparagus and rosemary garlic potatoes.
How To Make Barbecue Pot Roast
Step One: Season the Roast
To make the barbecue pot roast, start by seasoning the pot roast. Mine was small (only 2.21 lbs) because only a few of us were going to be eating it.
Drizzle with olive oil, sprinkle with sea salt and black pepper. Use your fingertips to rub the oil, salt, and pepper into the roast. Flip it over and do the same on the bottom and along the sides.
Heat an oven-safe pan like a Dutch oven over medium-high heat with two tablespoons of olive oil.
Put the seasoned roast in the pan and cook it for about 2 minutes until it is browned. Carefully flip the roast over and sear the opposite side for a couple of minutes. If possible, hold onto the roast with tongs and sear the sides, as well.
This method is very similar to the way I make my steaks. I am a big chicken when it comes to cooking things in hot oil, so I wore big oven mitts and used my big grilling tongs to turn the meat over.
Step Three: Cook the Roast
After the roast is seared, pour a bottle of barbecue sauce over the pot roast, lifting it up to allow the sauce to get underneath the roast as well.
Put the lid on the Dutch oven and cook the roast in the oven, at 325 degrees, for 2 – 2 1/2 hours, turning after one hour, until fully cooked.
Carefully move the fork tender roast to a serving tray.
I served it with roasted, rosemary garlic potatoes and realized that I have a slight rosemary crush! Every rosemary flavored bite I took made me happy.
I also made some delicious roasted asparagus that is simply roasted with olive oil, salt and pepper.
The meal was delicious and so easy to make. Vanessa filled a couple of containers and ran some over to my sister’s house so they could enjoy the meal too. They said it was “delish” and so much better than the frozen pizza they were planning to have for dinner!
Drizzle one tablespoon of olive oil on the roast. Sprinkle with two teaspoons of sea salt and two teaspoons of black pepper. Use fingertips to rub the seasoning into the roast. Flip the roast over and repeat on the opposite side.
Heat two tablespoons of olive oil in a Dutch oven over medium high heat. Once the oil is hot, carefully put the seasoned roast in the pan using large tongs and sear it for about 2 minutes, until browned. Carefully flip the roast over and sear the opposite side for a couple of minutes. If possible, hold the roast with the tongs and sear the edges as well.
Pour a bottle of barbecue sauce over the roast, lifting it up to allow some of the sauce to get underneath the roast. Put the lid on the Dutch oven and cook the roast in the oven, at 325˚F, for 2 to 2 1/2 hours (turning after one hour) or until fully cooked.
Thread the roast onto a rotating barbecue spit above indirect heat. Cook the roast for two hours, or until the internal temperature of the roast is at least 145 degrees F (63 degrees C). Baste often during the last hour with reserved marinade.
Can You Grill a Roast? Cooking a roast on the grill may not be as far-fetched of an idea as you'd think. In fact, if done correctly, the cut can cook evenly and remain as tender as it would in the oven. And, you'll even get that incredible smoky flavor you expect from grilled foods.
Yes, pot roast absolutely becomes more tender the longer it cooks. Roasts are generally made from tougher cuts of meat, such as chuck or brisket, which contain a lot of collagen, connective tissue, and fat. These tougher tissues require a long cooking time to break down and for the collagen to converts into gelatin.
Whether you cook your pot roast using a stovetop, oven, slow cooker, or pressure cooker method, you'll always get the most tender and flavorful results if you use low temperatures over a long period of time. That's what it takes to melt down the tough connective tissue in the meat until you can cut it with a fork.
Place roast on gas grill over medium-low heat or on charcoal grill 4 to 6 inches from medium-low coals. Cover grill; cook 50 to 75 minutes or until of desired doneness, turning once and basting with reserved marinade during last 15 minutes of cooking time.
Set the temp on the grill to about 300 to 250. For the first hour grill the roast on indirect heat away from the flames for about 1 hour. Then wrap it in 3 layers of heavy-duty foil. Now back on the grill with indirect heat for another 2.5 hours.
Once it is wrapped, place it on the grates on the indirect heat side of the grill, as far away from the heat source as possible, and let it slowly roast. The ideal cooking temperature to slow-cook your roast will be about 300°F - 325°F. You want to let it cook until it reaches a minimum internal temperature of 145ºF.
Use a meat thermometer (trust me, it's handy!) and let it cook until the internal temperature reaches 145ºF. This should take about an hour, but start to keep a closer eye on the roast after about 45 minutes. Once your pot roast is cooked, you can remove it from the grill and let it rest for about ten minutes.
Place the roast on top of the onions and season with the salt and pepper. Add 1/4 cup of the broth or water and bring to a simmer. Cover and simmer on low for 2 hours. Add the potatoes, carrots, and quartered onions and cover and slowly simmer for 1 hour longer.
Traditionally, this means the meat is partially covered in liquid and cooked for hours until it becomes juicy and tender. In this case, the steam from the slow cooker creates moisture for the meat to braise in.
There are several reasons why this could have happened even after so much cooking. First, your choice of a rump roast could be a factor since cuts from the hind quarter are very muscular and, since muscles are the most resistant to breaking, this cut is quite stubborn when it comes to becoming tender.
A three-pound roast usually takes four to five hours to cook thoroughly. A lower, slower setting will take six to eight hours for the most tender finish. Using a bone-in cut will enhance flavor but extend the cooking time.
As the name suggests, how to cook roast beef low and slow involves using low heat temperatures. Typically, the ideal low temperature you need can vary depending on your grill, but the general range is clear. Low heat on most grills often falls between 225 and 250 degrees Fahrenheit but can be even lower.
Introduction: My name is Lidia Grady, I am a thankful, fine, glamorous, lucky, lively, pleasant, shiny person who loves writing and wants to share my knowledge and understanding with you.
We notice you're using an ad blocker
Without advertising income, we can't keep making this site awesome for you.